Dito Sama 602285 handleiding
Handleiding
Je bekijkt pagina 29 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 31
8.4.4 Cleaning the machine
PROHIBITION
IT IS FORBIDDEN TO CLEAN THE MACHINE IN A WAY OTHER THAN AS
INSTRUCTED BY THE MANUFACTURER.
GGF S.R.L. NO LIABILITY IS ASSUMED FOR ANY DAMAGE TO THE MACHINE
FOR FAILURE TO COMPLY WITH THE RECOMMENDATIONS CONTAINED IN THIS
DOCUMENTATION.
The machine has been designed for the production of food products and it is therefore essential that it is
cleaned and sanitised thoroughly every day, according to the local health and hygiene standards for the
environments being used for the production of food. The first and most effective form of preventive
maintenance is to keep the machine clean. Careful and regular cleaning prevents the formation of mixture
residues which, in the long term, could damage moving parts.
Cleaning the external body of the machine
The external body of the machine must be cleaned using only a damp cloth previously immersed in water
and sufficiently wrung out. The cloth must be chosen and sanitised as specified by the local hygienic-sanitary
standards relating to the environments being used for the production of food. For cleaning, it is absolutely
forbidden to use tools that can scratch or damage the machine.
Cleaning the inside of the bowl and the kneading tools
Remove any dough residues with a dedicated scratch-resistant tool that does not damage the internal
surface of the bowl and the kneading tools. Clean the bowl with water and, if necessary, with food soap.
Rinse the bowl well and sanitise it as specified by the local health and hygiene standards relating to the
environments used for the production of food.
Cleaning the PETg cover.
The PETg cover has been designed for food production, and it is therefore essential that it be cleaned and
sanitized thoroughly. For proper cleaning, it is recommended to use lukewarm water, with a temperature
below 50°C, containing a neutral soap. Rinse with lukewarm water and dry with a cloth. Cleaning and
sanitizing using professional dishwashers is not recommended.
8.4.3 Annual controls
At least ONCE EVERY 5 YEARS:
1. Provide for the replacement of the safety microswitch to protect the front mobile guard located inside the
head cover of the machine as, following the analysis of the performance level carried out, it has been
found that the device no longer guarantees an adequate level of reliability.
At least ONCE EVERY 10 YEARS:
2. Provide for the replacement of the switch block consisting of the protective START and STOP button
which guarantees the safety function of the control with maintained action as, following the analysis of
the performance level carried out, it has been found that the device no longer guarantees an adequate
level of reliability.
Bekijk gratis de handleiding van Dito Sama 602285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602285 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
