Dito Sama 602284 handleiding
Handleiding
Je bekijkt pagina 17 van 31
SPIRAL MACHINE
L10 / L22 / L33 / L42 / L53 / L62
pag. 19
4 Installation
4.1 General warnings
The operator assigned to installing the machine must be a person who is adequately trained and informed
about the work they are preparing to undertake.
The operator must use suitable means to safely carry out the installation operations: therefore, it should be
remembered that all the equipment used for the installation must be in a perfect condition and must be used
as provided by the respective manufacturers.
The choice of the place or spaces is important for the quality of the work (maintenance, safety, etc.): this
area must be well lit and ventilated.
The environmental and operating conditions must not constitute an obstacle for access to the controls.
Before starting to handle of the machine, it is necessary to check:
• the efficiency of the lifting equipment;
• the capacity of the same. For the lifting of machines or parts of it, means having a minimum capacity
greater than the declared weight are required;
• the characteristics (weight, size, etc.) of the machine indicated in the paragraph 3.2.
• this device must be connected with flexible connections that follow for easy equipotential bonding
andconnection to utilities such as electricity, water, gas and steam, so that the device can be moved in
therequired direction for cleaning by a distance no less than the size of the device in the direction
ofmovement plus 50mm, without the flexible connections being stretched or subjected to stress.
ATTENTION
THE MACHINE MUST BE PLACED IN A COVERED AREA PROTECTED FROM
DIRECT CONTACT WITH ATMOSPHERIC AGENTS.
4.2 Transporting the machine
The machine can be shipped by truck, container or in rare cases by air.
The packaging consists of a cardboard box containing the machine on wooden pallets.
The dimensions and gross weight of the packed machines are shown in Fig. 3-2.
4.3 Handling
Machine handling operations must be carried out by trained personnel (harnessers, forklift drivers, crane
operators, etc.).
ATTENTION
FOR TRANSPORTATION OF THE MACHINES, VEHICLES WITH A MINIMUM
CAPACITY HIGHER THAN THE DECLARED WEIGHT OF THE SAME ARE
REQUIRED (SEE PARAGRAPH 3.2). BEFORE STARTING HANDLING, IT IS
NECESSARY TO CHECK THE EFFICIENCY OF THE LIFTING MEANS AND THEIR
CAPACITY.
The packed machine is moved by means of a transpallet by inserting the forks on the pallet making sure that
they protrude from the pallet itself.
The unpacked machine is manually moved by the operator by pushing or dragging as the machine is
equipped with 4 wheels, 2 of which are on the front with a mechanical brake device.
Bekijk gratis de handleiding van Dito Sama 602284, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dito Sama |
| Model | 602284 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
