Digi-Pas DWL5800XY handleiding
Handleiding
Je bekijkt pagina 50 van 73
Digi-Pas
®
© 2023 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 44
DWL-5x000XY DATA SHEET
Byte [n] Command Descriptions
Byte [0] 0x06 From computer
Byte [1] 0x01 To Sensor
Byte [2] 0x07 Alternate Zero in Single Axis Mode
Byte [3] 0x6C
Alternate Zero Command
0x6C: Set Alternate Zero
0x46: Reset Alternate Zero
Byte [4]~[9] 0x00 Not Applicable
Byte [10] 0x00 CRC16 High
Byte [11] 0x00 CRC16 Low
6.5.6. Alternate Zero in Dual Axis Mode
To set Alternate Zero in Dual Axis Mode:
<< (To sensor) : 0x06, 0x01, 0x0A, 0x6C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
Byte [n] Command Descriptions
Byte [0] 0x06 From computer
Byte [1] 0x01 To Sensor
Byte [2] 0x0A Alternate Zero in Dual Axis Mode
Byte [3] 0x6C Alternate Zero Command
0x6C: Set Alternate Zero
0x46 : Reset Alternate Zero
Byte [4]~[9] 0x00 Not Applicable
Byte [10] 0x00 CRC16 High
Byte [11] 0x00 CRC16 Low
After setting alternate zero, the sensor module will automatically switched to dual axis
mode. (Please refer to 6.5.2 Dual Axis Mode)
6.5.7. Absolute Level in Single & Dual Axis Mode Calculation
To set the device in absolute level measurement, please follow the following calculation formula:
Absolute offset data = (Front Measurement Position Value + Back Measurement Position Value) / 2
Absolute Level mode measurement = Measurement data - absolute offset data
Bekijk gratis de handleiding van Digi-Pas DWL5800XY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Digi-Pas |
| Model | DWL5800XY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
