Deye SUN-29.9K-SG01HP3-EU-BM3 handleiding

Niet gecategoriseerd

Deye

61 pagina's

PDF beschikbaar

Handleiding

- 50-

Error code

F07 DCDC1_START_Failure

F13 Working_Mode_Change

F15 AC_OverCurr_SW_Failure

F16 GFCI_Failure

F18 Tz_AC_OverCurr_Fault

The BUS voltage can’t be reached by PV or battery.

1. Switch oﬀ the DC switches and restart the inverter.

The BUS voltage can’t be reached by PV or battery.

1. Switch oﬀ the DC switches and restart the inverter.

F04 GFDI_Ground_Failure Check whether the PV is grounded.

F09 IGBT_Failure Restart the inverter 3 times and restore the factory settings.

F10 AuxPowerBoard_Failure

1. First check whether the inverter switch is open.

2. Restart the inverter 3 times and restore the factory settings.

F11 AC_MainContactor_Failure Restart the inverter 3 times and restore the factory settings.

F05 EEPROM_Read_Failure Restart the inverter 3 times and restore the factory settings.

Restart the inverter 3 times and restore the factory settings

F06 EEPROM_Write_Failure

1. When the grid type and frequency have changed it will

report F13.

2. When the battery mode has been changed to "No battery"

mode, it will report F13.

3. For some old FW version, it will report F13 when the

system's work mode has been changed.

4. Generally, this error will disappear automatically.

5. If it remains the same, turn oﬀ DC and AC switches for one

EEPROM_Write_Failure

minute, then turn on the DC and AC switches.

AC side over current fault

1. Please check whether the backup load power and common

load power are within the range.

2. Restart and check whether it is normal.

Leakage current fault

1. Check the PV side cable ground connection.

2. Restart the system 2-3 times.

AC side over current fault

1. Please check whether the backup load power and

commonload power are within the range.

2. Restart and check whether it is normal.

F19 Tz_Integ_Fault Restart the inverter 3 times and restore the factory settings.

F08 DCDC2_START_Failure

F12 AC_SlaveContactor_Failure Restart the inverter 3 times and restore the factory settings.

F14 DC_OverCurr_Failure Restart the inverter 3 times and restore the factory settings.

F17 Tz_PV_OverCurr_Fault

1. Check the PV connection and whether the PV is unstable.

2. Restart the inverter 3 times.

Description Solutions

Bekijk gratis de handleiding van Deye SUN-29.9K-SG01HP3-EU-BM3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.