Dexibell Vivo SX7 handleiding
Handleiding
Je bekijkt pagina 19 van 52
19
Selecting the Tones
VIVO SX7 has a wide selection of high quality tones arranged in eight
categories. In particular, thanks to new sound engine, the Piano tones are
faithfully reproduced with all the subtle nuances of a real acoustic piano.
The VIVO SX7 allows you to assign any of the available tones to any of the
three real-time parts. Tone selection always applies to the part (1, 2 or 3)
whose eld is currently underlined in the main page.
How to Select a Part
Before to operate a tone change you need to select on which part you
want to do it.
1. From the main page, use the [] [] buttons to select the
part.
The display underline the eld of the selected part.
The tone selection is always applies to the part whose eld is
underlined.
How to Select Tones
How to Select Tones From the Main Page
1. Use the [DATA ENTRY] knob or the [] [] buttons to
scroll through the list of the sounds and select the desired
sound.
OR
Selecting Tones from a Tone List by the
[SOUND] Button
Press this sound
1. Press the [SOUND] button to temporarily open the sounds
list page.
9
The [SOUND] indicator lights and a temporary page shows the list of the
sounds of the selected part, the current sound is underlined:
Sound family
2. While the page is active, use the [DATA ENTRY] knob or
the [] [] buttons to select a tone in the same sound
family.
If during normal operation the window closes automatically, press
the [SOUND] button again.
See "VIVO SX7's Tone List" (p. 47).
3. While the page is active, press the [] [] buttons to
select the previous or next sound family.
After few seconds of inactivity of the change tone operation, the
Main page is shown.
TIPS
A quick way to change a tone from the Main page: use the
[DATA ENTRY] knob or the []
[] buttons to select a next or
previous tone in the same category.
Tone MIDI Information
Tones can also be selected via USB MIDI. To this eect, they use an
“internal” address, which is not usually displayed. For MIDI applications
involving sequencers or external controllers, knowing the “ocial” address
may come in handy. The VIVO SX7 has an handy system that provides this
information instantly—there is thus no need to look up the MIDI address
in the tones list at the end of this manual.
1. Press the [SOUND] button to temporarily open the sounds
list page.
1. The [SOUND] indicator lights and a temporary page shows the list
of the sounds of the selected part, the current sound is underlined:
2. Press one of the Function buttons located below the
display.
Bekijk gratis de handleiding van Dexibell Vivo SX7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | Vivo SX7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10285 MB |
