Dexibell Vivo S7 Pro M handleiding
Handleiding
Je bekijkt pagina 12 van 80
12
S
1
WHEEL 1, WHEEL 2
Move these wheel forward or backward to modify the
value of the assigned parameter. At default the WHEEL 1 is
assigned to the Pitch and the WHEEL2 to the Modulation. To
assign another parameter to these controllers see p. 64.
2
Turns the power on or o (p. 24).
With the factory settings S7 PRO M’s power will
automatically be switched o 120 minutes after you stop
playing or operating.
If S7 PRO M’s power has been turned o automatically, you
can use the [" ] switch to turn the S7 PRO M back on. If you
don’t want the power to turn o automatically, set the “AUTO
OFF” parameter to “OFF” (p. 69).
NOTE
To avoid malfunctions, never disconnect the AC/DC adapter while
the instrument is turned on.
3
VOLUME
Use this knob to set S7 PRO M’s overall volume.
4
MASTER EQ
S7 PRO M is provided of an useful Master Equalizer. Press
this button to adjust Low Gain, Middle Frequencies, Middle
Gain and High gain to obtain the best possible sound when
listening through an external reproduction system or adapt
the sound response of a room.
5
REVERB section
This section allows you to enable and choose the type of
reverb
6
C1~C6 / TO MIDI
This button allows you to enable the control knobs C1~C6 to
send MIDI messages to control external MIDI devices.
7
CHORD ENHANCER and CHORD FREEZE
The [ENHANCER] button enable the Enhancer function.
This function improve the sound adding notes to the
played chord. See "Performing Musical Chords" (p. 34).
The [FREEZE] button to enable the Freeze function and
memorize the chord played in the keyboard in that moment.
From now on and until the function is active, whenever you
press a note in the keyboard the chord memorized will be
reproduced with the same tonality of the played note. For
details see p. 32.
NOTE
The Chord Enhancer function works when a not percussive
tone is selected . See the sounds table "S7/S3 PRO and S7
PRO M Orchestral Tones List" (p. 73).
8
PLAYER section
Press the [SONG] button to switch in Song Mode. See p.
51.
Press it together with the [ *-, ] button to listen the demo
song.
Press the [ *-, ] button to start playing. Press it again to stop
playing (See p. 56).
Press the [
] button to start recording of your song (See p.
53).
9
ASSIGN 1-2
These are assignable buttons. You can use them to directly
access frequently used functions that are only available via
the function menu. See p. 64.
10
TRANSPOSE
This button calls up the transposition function. See p. 34. If the
button indicator doesn’t light the instrument use its normal pitch.
11
OCTAVE
This button calls up the octave function. See p. 34.
12
FX SELECT A/B (Main Fx, Coupled Fx, Lower/Bass Fx)
Use these buttons to select which AUDIO FX processor (A or
B) you want to control for the Main, Coupled and Lower/Bass
part. The [ON] buttons and the (C1-C2, C3-C4, C5-C6) control
knobs are assigned to the AUDIO FX processor you selected
(A or B).
13
ON (Main Fx, Coupled Fx, Lower/Bass Fx)
Use these buttons to switch ON/OFF the AUDIO FX
processors for the relative parts (Main, Coupled and Lower/
Bass). Use the [FX SELECT A] or the [FX SELECT B] buttons to
select the AUDIO FX processor you want to control.
14
C1-C2, C3-C4, C5-C6 control knobs
Use these control knobs to adjust the parameter value of the
eect related to the current tone. Use the [FX SELECT A] or
the [FX SELECT B] buttons to select the AUDIO FX processor
you want to control.
15
MIXER
These buttons allows you to enable the control knobs C1~C6
to adjust the volume and the reverb value for the Main,
Coupled and Lower/Bass parts.
54
7
9
8
12 13
14
6
10
1
2
3
11
15
27
Panel Description
3
S7 PRO M
Bekijk gratis de handleiding van Dexibell Vivo S7 Pro M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | Vivo S7 Pro M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19465 MB |
