Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 55 van 84
55
Programmable Four MIDI zones
Parameter Setting Explanation
Reverb Send
OFF, ON
OFF: the reverb message is not sent
via MIDI.
ON: the reverb message is sent via
MIDI.
Bender
OFF, ON
OFF: The bender wheel is decoupled.
On: The bender wheel is coupled
with the zone. The bender values are
transmitted via MIDI.
Modulation
OFF, ON
OFF: The modulation wheel is
decoupled.
ON: The modulation wheel is coupled
with the zone. The modulation values
are transmitted via MIDI.
Aftertouch
OFF, ON
OFF: The aftertouch is decoupled.
ON: The aftertouch is coupled with
the zone. The aftertouch values are
transmitted via MIDI.
Foot SW
OFF, ON
OFF: The function of the pedal is
decoupled.
ON: The function linked to the pedal is
coupled with the zone. The values are
transmitted via MIDI.
Damper
OFF, ON
Expression
OFF, ON
CC Assign1
OFF, CC1 ~ CC127
These four control change messages
are available to be transmitted to
the external device when the zone is
activated.
OFF: No control change is transmitted.
CC1 ~ CC127: Select the control
change to send via MIDI.
0 ~ 127: Select the value.
CC Value 1
0 ~ 127
CC Assign2
OFF, CC1 ~ CC127
CC Value 2
0 ~ 127
CC Assign3
OFF, CC1 ~ CC127
CC Value 3
0 ~ 127
CC Assign4
OFF, CC1 ~ CC127
CC Value 4
0 ~ 127
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
