Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 23 van 84
23
Most Frequently Used Tones (Favorite Tone)
you that the tone selection is applied on this part.
MEMO
To change the split point see "How to change the Split Point" (p. 24).
ME
Selecting a Part from the Main Page
You can also select a part from the Main Page.
1. From the main page, use the [] [] buttons to select the
part.
The display underline the eld of the selected part. Any tone
change will be applied to the selected part.
How to Select Tones
Before to operate a tone change you need to select on which part you
want to do it. See "How to Select a Part" (p. 22).
MEMO
If you want to select the [ORGAN TW] sounds, please refer to the
"Organ Section" (p. 26).
NOTE
Note that you cannot select a tonewheel preset for the Coupled
part. This because the Coupled part is not a typical organ part.
The organs have only three keyboard parts: Main, Lower and
Bass (Pedal).
1. Press the desiderate Tone button to select the sound
category that you want to play.
The last sound you selected for that category is recalled.
The button indicator lights and a temporary window shows the list
of tones where the recalled sound is underlined:
Sound family
In the example was pressed [ PIANO ] button.
2. While the tone window is active, use the [] [] buttons
to select a tone in the same category.
If during normal operation the window closes automatically, press
the Tone button again.
See "VIVO S2 Tone List" (p. 74) for the list of available tones.
3. Play the keyboard.
You’ll hear the sound of the selected instrument.
MEMO
The last sound you select in each category is memorized
temporarily and will be recalled every time you press the
corresponding Tone button.
4. While the tone window is active, press the [] [] buttons
to select the previous or next tone category or press
another desiderate tone buttons.
After few seconds of inactivity of the change tone operation, the
Main page is shown.
TIPS
A quick way to change a tone from the Main page: use the
[]
[] buttons to select a next or previous tone in the same
category.
5. To adjust the overall volume use the VOLUME knob.
MEMO
To change the volume of a specic part, you can use the 'Level'
parameter (p. 61) in the SETTING group, accessible via the [MENU]
button by selecting 'SETTING'. Alternatively, you can adjust the volume
of each part in the 'VOLUME' environment, accessed through the
[VOLUME] button. For more details, see "Adjusting the Volume for Each
Part" (p. 32).
NOTE
You can set the keyboard range for a specic part using the
"Note Low" and "Note High" parameters. See "MAIN SETTING"
(p. 61), "COUPLED SETTING" (p. 62), and "LOWER SETTING"
(p. 62).
Most Frequently Used Tones (Favorite
Tone)
The 'Favorite Tone' function lets you an easy recall of most frequently used
sounds. You can memorize your Favorite Tone for each of six categories
and recall it simply pressing the tone button. It will be helpful in a live
performance situation.
NOTE
This function is not available for the 'TW/ORGAN' family tone.
1. Select a tone you prefer. See "Selecting Tones" (p. 22).
2. Press and hold the Tone button that contains the selected
tone to memorize it.
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
