Dexibell VIVO S2 handleiding
Handleiding
Je bekijkt pagina 16 van 84
16
Before You Start to Play
Listening Through Headphones
You can use headphones to enjoy the VIVO S2 without disturbing
those around you, such as at night.
1. Here you can connect stereo headphones. VIVO S2 has
two headphones jacks . Two people can use headphones
simultaneously.
DX-HF7 (headphones)
2. Rotate the VIVO S2’s [VOLUME] knob to adjust the volume
of the headphone.
Cautions when using headphones
• To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
• Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at a reasonable volume.
Connecting Digital Player devices
You can connect the INPUT jack to an audio playback device.
The audio of playback will be reproduced with the VIVO S2's
OUTPUT sockets .
1. Rotate the [VOLUME] the knob toward the left position to
minimize the volume.
2. Connect the VIVO S2’s AUDIO IN jack to the output of an
external signal source.
AUDIO IN
MEMO
You can adjust the volume of device connected to the VIVO S2’s
INPUT jack. See "AUDIO INPUT" (p. 67).
Connecting the VIVO S2 to Your
Computer
• If you use a USB cable (commercially available) to connect the
COMPUTER port located on the VIVO S2’s rear panel to the USB
port of your computer, you’ll be able to transfer MIDI and AUDIO
data between the VIVO S2 and your sequencer software.
NOTE
VIVO S2 does not support GM/GS standard.
What do you need to connect the VIVO S2 with your
computer?
• USB cable (type A–male - type B–male: commercially available)
1. Use a standard USB cable (AgB-type connectors,
commercially available) to connect the VIVO S2 to your
computer as shown below.
USB MIDI + AUDIO Streaming
NOTE
• Switch on the VIVO S2 before you start up the DAW software
on your computer.
• Before to connect any other equipment, move the [VOLUME]
knob counterclockwise to minimize the volume.
To adjust the USB audio level see "USB AUDIO" (p. 67).
Connecting an USB Memory Device
(commercially available)
1. Plug an USB Memory device to the MEMORY port on the
VIVO S2’s rear panel.
Bekijk gratis de handleiding van Dexibell VIVO S2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO S2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17107 MB |
