Dexibell VIVO H6 handleiding
Handleiding
Je bekijkt pagina 26 van 76
26
Selecting Tones
MEMO
To play the keyboard in split mode set again the "SPLIT"
parameter to "ON".
How to Reorder the Tone List
Use this function if you need to reorder the tones list. If you wish, you can
move the position of the individual tone in the list.
1. Press the [MENU/EXIT] button and select SOUND LIST.
The display shows the tone list.
2. Use [DATA ENTRY] knob or the [] [] buttons to select
the tone you want to reorder.
3. Press the "MOVE" function button.
A symbol appears to the left of the selected tone.
4. Use the [DATA ENTRY] knob or the [][] buttons to
select the new position where you want to move the
selected tone. If you want to move the tone in another
category use the [] [] buttons.
5. Press the "OK" Function button to conrm the operation
or the "CANCEL" Function button to cancel the process.
Tone MIDI Information
Tones can also be selected via MIDI. To this eect, they use an “internal”
address, which is not usually displayed. For MIDI applications involving
sequencers or external controllers, knowing the “ocial” address may
come in handy. The VIVO H6 has a convenient system that provides this
information instantly—there is thus no need to look up the MIDI address
in the tones list at the end of this manual.
1. Select a tone. See "How to Select Tones" (p. 23).
The following temporary page is shown:
In the example above, we selected the "VIVO Live" tone.
2. Press one of the Function buttons located below the
display.
The tone MIDI information is temporarily shown:
Bekijk gratis de handleiding van Dexibell VIVO H6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dexibell |
| Model | VIVO H6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15557 MB |
