DeWalt DXV20PTA-QT handleiding
Handleiding
Je bekijkt pagina 23 van 100
21
TROUBLESHOOTING
WARNING:
TO REDUCE THE RISK OF INJURY FROM
MOVING PARTS AND/OR ELECTRICAL SHOCK,
TURN POWER SWITCH OFF AND DISCONNECT
GROUNDED PLUG FROM ELECTRICAL OUTLET
BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
Minor problems often can be xed without calling
customer service.
English
PROBLEM SOLUTION
Motor does not run
Check power cord, plugs and outlet.
Ensure the on/off switch is in the
ON position ( I )
Remove blockages in the nozzle,
extension wands, hose or lter.
Replace the disposable dust bag.
Clean or replace the lter.
Empty dust tank, refer to EMPTY
THE TANK under OPERATING
INSTRUCTIONS.
Check for proper installation of
the lter.
Suction capacity
decreases
Vacuum stops
running
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the dust tank, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position ( I ) to
test.
Ensure lters are not damaged;
replace if necessary.
Ensure lter seals are in place and
are secure.
Check the t of the vacuum head.
Check for proper installation of the
lters.
Dust comes out
while vacuuming
WARNING:
If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
WARNING:
This product is NOT to be used for ltering of pathogens,
for example COVID-19. Follow all local, state and federal
guidance on general cleaning practices.
YEAR
LIMITED
GUARANTEE
3
TOOL GUARANTEE
Bekijk gratis de handleiding van DeWalt DXV20PTA-QT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DXV20PTA-QT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14791 MB |
