DeWalt DT70620 handleiding
Handleiding
Je bekijkt pagina 10 van 64
8
english
Congratulations!
You have chosen a D
eWALT
tool. Years of
experience, thorough product development and
innovation make
DeWALT
one of the most reliable
partners for professional power tool users.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
SHEAR ATTACHMENT
DT70620
DeWALT
declares that these products described are
in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-8:2009
For more information, please contact
DeWALT
at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
25.09.2015
WARNING: For your own safety, read
the power tool instruction manual before
using any accessory. Failure to heed
these warnings may result in personal
injury and serious damage to the tool
and the accessory. When servicing this
tool, use only identical replacement parts.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
SHEAR ATTACHMENT
DT70620
English (original instructions)
Additional Specific Safety
Instructions for Shears
• Before use ensure the shear attachment is
properly attached to the tool.
• To prevent inadvertent operation, lock the
trigger switch in the off position when the
tool is not in use or when storing the tool.
• Make sure the power tool is set to the
"forward" (clockwise) directions before
use.
• Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
“live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
• DO NOT hold the shear attachment as a
primary gripping surface.
• DO NOT use the shear with any kind of
accessory or attachment.
• NEVER have any part of your body near
the blades. Serious personal injury may result.
• Keep hands away from cutting area. A
moment of inattention while operating power
tools may result in serious personal injury.
• ALWAYS wear gloves when handling sheet
metal. The edges are sharp and can cause
serious personal injury.
• Firmly secure the piece of metal to be cut
to prevent movement during cutting.
• Blades are not replaceable. DO NOT sharpen
blades.
• Cut material at or below rated capacity.
Max thickness to be cut is 1.3 mm.
• ALWAYS start tool before engaging
material to be cut.
• If possible, cut material so scrap curl is to
the left. This direction will move curl down and
out of the way.
• Always wear gloves to pull scrap curl away
from you during use. This will also help with
speed cutting through sheet metal.
Bekijk gratis de handleiding van DeWalt DT70620, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DeWalt |
| Model | DT70620 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8950 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Yellow |
| Materiaal | Metaal |
| Constructietype | Mes met vast lemmet |
| Compatibiliteit | DeWALT |
| Type product | Universele schaaradapter |
