Handleiding
Je bekijkt pagina 2 van 32
2
User Guide (English)
Box Contents
SM50 Studio Monitor (1) User Guide
IEC Power Cable (1) Safety & Warranty Manual
Isolation Pad (1)
Support
For complete system requirements, compatibility information, and product registration, visit the
Denon DJ website: denondj.com.
For additional product support, visit denondj.com/support.
Specifications
Frequency response
50 Hz – 20 kHz (+3 dB)
Crossover frequenc
y
2.6 kHz
Low-frequency amplifier power 50 W with 20-gauge wiring to this transducer
High-frequency amplifier power 40 W with 20-gauge wiring to this transducer
LF cutoff flat, 80 Hz, 100 Hz
MF boost In/Out of 2 dB centered at 2 kHz
HF trim
+2 dB, 0 dB, -2 dB above 3 kHz
Acoustic space
0 dB, -2 dB, and -4 dB
Maximum signal-to-noise
(dynamic range)
> 97 dB (typical A-weighted)
Polarit
y
Positive signal at + input produces outward LF cone displacement
Input impedance
20 kΩ balanced, 10 kΩ unbalanced
Input sensitivity
100 mV pink noise input produces 92 dBA output SPL at 1 meter with
volume control at maximum
Power
factory-programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
Protection
RF interference, output current limiting; over-temperature; transient
on/off protection to prevent speaker "pops"; subsonic filter; external
mains fuse
Cabinet
Front and rear baffle 1" MDF with 0.75" MDF wrap. Black lacquer
paint on enclosure with soft touch black paint on curved front plate.
Size (width x height x depth)
8" x 12.5" x 10.1"
191 mm x 318 mm x 257 mm
Weight (monitor + power cable)
17.2 lbs./unit
7.8 kg/unit
Above specifications subject to change without notice.
Bekijk gratis de handleiding van Denon DJ SM50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Denon DJ |
| Model | SM50 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3848 MB |