Denon DJ DN-M2300R handleiding
Handleiding
Je bekijkt pagina 22 van 38
22
ENGLISH
1
To monitor the external input.
Press the REC button and hold it in for at least 3 seconds.
• The servo is stopped during monitoring.
• External monitoring may not be possible while the
UTOC is being read, etc.
With this function it is possible to monitor the sound from the
external input used as the recording source even when not in the
recording mode.
(8) External monitor function (MD 2 Only)
• 1/ALL REPEAT (PRESET 15)
The repeat play mode can be turned on and off with the LOOP
button.
SINGLE PLAY MODE:
1 track Repeat Mode
CONTINOUS PLAY MODE:
ALL track Repeat Mode
•
NEXT RESERVE TRACK (PRESET 14)
“RESERVE ON”
During playback, the next track to be played can be selected
using the SELECT knob.
SINGLE PLAY MODE:
The reserved track is searched for and the standby
mode is set.
When a track is reserved during repeat playback, the
reserved track is searched for and the one-track repeat
play mode is once again set.
CONTINOUS PLAY MODE:
The reserved track is searched for and playback
resumes.
The reserved track can be canceled with the PLAY MODE
button.
•
POWER ON PLAY (PRESET 16)
Repeat playback of the entire disc begins automatically when the
power is turned on.
In addition, if a program is preset, all repeat playback of the
program is performed.
(9) OTHER FUNCTION (MD 1, MD 2)
Ext.MONITOR
3
Canceling external input monitoring.
Press the REC button.
The settings before monitoring was started are restored.
• External monitoring can also be canceled by pressing
the PLAY/PAUSE, CUE or other buttons.
• If a disc is loaded during monitoring, the monitoring
mode is canceled.
2
1,32
Select the external input signal.
Set the input signal.
Press the EDIT/INPUT button and switch between analog
and digital, according to the input signal.
DIGITAL IN
DIGITAL IN
NOTE:
If the DIGITAL IN indicator is flashing, the digital signal
is unlocked. If this is the case, recording is not
possible.
Noise will be generated if the MD1 pitch is operated
when monitoring with MD1 selected as the input. Turn
the MD1 pitch off when MD1 is selected as the input.
Digital input mode
Analog input mode
Lit or flashing
(ANALOG / DIGITAL 1 / DIGITAL 2 / MD 1)
Bekijk gratis de handleiding van Denon DJ DN-M2300R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Denon DJ |
| Model | DN-M2300R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5433 MB |
