Denon DJ DN-M2300R handleiding
Handleiding
Je bekijkt pagina 21 van 38
21
ENGLISH
When cue points are stored on a track, they can be used for direct
search.
1
Load the cartridge.
2
Set the cue direct search mode.
Press the CUE SEARCH button.
NOTE:
The cue direct search mode cannot be set if no cue points
are stored on the track.
3-
1
Search for the cue point.
Press the CUE button.
The Cue1 point is searched for and the cue mode is set at
that position.
Press the CUE button again to search as follows:
CUE
3-
2
Cue points can also be searched for by turning the select
knob (
8 – 9).
4
Cancel the cue direct search mode.
The set returns to the normal operating mode.
Lit
Lit
Lit
Flashing
Flashing
When turned clockwise:
When turned counterclockwise:
Off
1
Load the cartridge.
Load the disc from which you want to copy into MD 1.
Load the disc onto which you want to copy into MD 2.
(6) Direct Search for Cue Points (MD 1, MD 2)
* This is a function for easily recording tracks from MD 1 onto MD
2.
Both the disc name and track names are copied. If the disc onto
which you are recording already has a disc name, however, the
disc name is not copied.
(7) 1 / 2 SYNCHRO REC Function (MD 1, MD 2)
2
Select the track you want to record on MD 1 and set the
standby mode there.
• The disc is played as set by the play mode setting.
• The programmed play mode comes in handy when you
only want to record certain tracks.
3
1
/
2 PLAY & RECORD STAND BY.
Press the 1
/
2 button.
MD 1:
Unlike in normal playback, in this mode the
PLAY/PAUSE, CUE, eject and other buttons are locked.
MD 2
:
MD2 is set to the same conditions as during normal
recording.
(This also applies to the AUTO LEVEL REC START
function.)
4
1
/
2
PLAY & RECORD
START.
Playback and Recording starts when the PLAY/PAUSE
button on MD 2 is pressed.
MD 1:
Playback starts.
MD 2:
Recording starts.
MD1 -> MD2
SYNCHRO REC!
3-
2
3-
1
2,4
3-
1
2,4
3-
2
3,5 6
1 1 4
Flashing
5
1 / 2 PLAY & RECORD STOP.
When the “1
/
2” button is pressed, MD 1 is set to the
pause mode, the UTOC is written on MD 2 and the
standby mode is set.
MD 1
•
If playback ends, recording also stops.
•
If the disc onto which you are recording is full, MD 1
is set to the pause mode, the UTOC is written on
MD 2 and the standby mode is set.
CAUTION:
Note that if the playing time of the disc in MD 1 is the same as the
recordable time of the disc in MD 2 and there is a defect, etc., on the
disc in MD 2, it will not be possible to record all the data from the disc
in MD 1. Use a disc with a longer recordable time than the playing time
of the disc you want to record.
Bekijk gratis de handleiding van Denon DJ DN-M2300R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Denon DJ |
| Model | DN-M2300R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5433 MB |
