Handleiding
Je bekijkt pagina 38 van 87
38 Setting up the monitor
Setting up the monitor
Attaching the stand
NOTE: The stand is not attached when the monitor is shipped from the factory.
NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are attaching a
stand that you purchased from any other source, follow the setup instructions that were included with the stand.
1. Follow the instructions on the flaps of carton to remove the stand from the top cushion that secures it.
Figure 19. Remove the stand riser and stand base
2. Remove the stand riser and stand base from the packaging cushion.
3. Insert the stand base blocks fully into the stand slot. Align and place the stand riser on the stand base.
4. Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly.
5. Close the screw handle.
4 5
3
Figure 20. Insert the stand base
Bekijk gratis de handleiding van Dell Pro 27 Plus P2725D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 27 Plus P2725D |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 11264 MB |
