Handleiding
Je bekijkt pagina 21 van 36
Part Number: 9294997A 09/21 21
Section 2 Installation
Step 8. Locate the pan as shown in the picture above
and mount with (4) self-drilling screws. Make sure to
place the Z-clip between the front (2) mounting holes
in the evaporator pan and the bottom of the cabinet.
This Z-clip will hold the front bend of the condensate
evaporator cover. Route the drain tubing into the center
of the evaporator pan. If drain tube is too long, it may
be cut down in length. Tubing should end near center of
evaporator pan to assure condensate flows into pan.
Step 9. Hook the front bend of the condensate evaporator
cover on the Z-clip and mount the cover with (2) self-
drilling screws at the rear.
STEP 10. Plug unit power cord back in. Once unit is powered
up, the condensate evaporator will cycle ON whenever
the freezer compressor and condenser fan motor are
running.
Boom of unit
without Evap Pan
A
B
C
A
B
7.75”
8.75”
12”
Pan Cover
(Hook on Z-Clip and Lift)
Evap Pan
Heating Element
Drain Hose
Z-Clip
B
A
C
Bekijk gratis de handleiding van Delfield GAR1P-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delfield |
| Model | GAR1P-S |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10617 MB |
