Handleiding
Je bekijkt pagina 9 van 13
Troubleshooting
Oven emits steam when it is in use.
It is normal that steam
escapes during
operation
>>> This is not a fault
The appliance emits metal noises while
heating and cooling.
When the metal parts
are heated, they may
expand and cause
noise
>>> This is not a fault
The appliance does not operate.
The mains fuse is
defective or has tripped
>>> Check fuses in the
fuse box. If necessary,
replace or reset them
Appliance is not
plugged into the wall
socket
>>> Check the plug
connection
Oven does not heat.
Function and/or
Temperature are not
set
>>> Set the function and
the temperature with the
Function and/or
Temperature knob/key
The warranty does not cover the
replacement or repair
of rusted or corroded plates.
Important! Any food residue
must be removed from the bottom
of the cavity before you start steam
assisted cleaning. Remove all oven
accessories.
Caring for solid plates
• Before using the plates for the first time,
switch them on for about 4 minutes at the
highest setting. This allows the factory applied
protective coating to burn in.
• To clean the plates, wipe them with a damp
cloth or nylon pad with a little liquid detergent.
Do not use metal scourers or sharp metal
objects to clean the plates.
• After cleaning, dry the plates by switching
them on for a short while.
• To prevent rust, periodically apply some,
sewing machine oil or electrical hotplate
polish - available from Defy Service Centers.
• Thermal shock could damage the plates. Do
not put cold pots on very hot plates.
Page 8
4. Maintenance and Care
General cleaning
• Switch off the electrical power supply before
cleaning any part of the appliance. Wipe down
glass panels, cabinet, door, control knobs,
trims and handles with a hot soapy cloth. Do
not use a steam cleaner.
• Use only liquid household cleaners and avoid
abrasive powders, scouring pads.
Cleaning the oven cavity
• Open the oven door and allow the oven to
cool down.
• For improved access, the oven door may be
removed. See page 9 for directions.
• It may be necessary to soak burnt soils with a
liquid cleaner to soften them before scrubbing
them with a nylon brush or scouring sponge.
• Heavy soils on the bottom of the oven may
require overnight soaking under a sponge
liberally sprinkled with household ammonia.
The soil can then be removed the following
morning by washing normally
Steam assisted cleaning
• Pour 75 ml of water into the emboss on the
oven floor.
• Select the Steam Assisted cleaning function.
• Turn the oven on to run this cycle for 5
minutes.
• At the end of the cycle, wait 5 minutes before
opening the door.
• Open the door and wipe the inner surfaces of
the oven with a damp sponge or cloth.
• Use warm water with washing liquid, a soft
cloth or sponge to clean persistent dirt and
wipe it with a dry cloth.
Bekijk gratis de handleiding van Defy DSS553, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Defy |
| Model | DSS553 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1536 MB |
