Defy DGS578 handleiding

16 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 16
Page 11
5. Maintenance and Care
Service intervals
Every twelve months the appliance should be
serviced by a Defy Service agent to ensure
continued efficient and safe operation.
If required, the cleaning of the valves should
only be carried out by a qualified Defy
technician. i.e. Burner not functioning correctly.
Wash removable burner parts weekly with hot
water and detergent.
Remove any encrustations and ensure that the
burner holes are clear.
The condition of the gas hose and valve must
be inspected for leaks when the gas bottle is re-
filled.
Steam assisted cleaning
Pour 75 ml of water into the emboss on the
oven floor.
Select the steam assisted cleaning function.
Turn the oven on to run this cycle for 5 minutes.
At the end of the cycle, wait 5 minutes before
opening the door.
Open the door and wipe the inner surfaces of
the oven with a damp sponge or cloth.
Use warm water with washing liquid, a soft cloth
or sponge to clean persistent dirt and wipe it
with a dry cloth.
General cleaning
Wipe down glass panels, cabinet, door, control
knobs, trims and handles with a hot soapy
cloth. Do not use a steam cleaner.
Use only liquid household cleaners and avoid
abrasive powders or scouring pads.
Caring for gas hobs
Remove the burner caps and wipe them with
a thin damp cloth or non-abrasive sponge.
Remove and clean the saucepan carriers and
the hob.
Dry burners afterward and blow away any
residual water in the gas outlet holes.
Install the burner caps and make sure that
they are seated correctly.
Caring for solid plates
Before using the plates for the first time,
switch them on for about 4 minutes at the
highest setting. This allows the factory applied
protective coating to burn in.
To clean the plates, wipe them with a damp
cloth or nylon pad with a little liquid detergent.
Do not use metal scourers or sharp metal
objects to clean the plates.
After cleaning, dry the plates by switching
them on for a short while.
To prevent rust, periodically apply some,
sewing machine oil or electrical hotplate
polish - available from Defy Service Centers.
Thermal shock could damage the plates. Do
not put cold pots on very hot plates.
DANGER Risk of electric shock!
Switch off the electricity before
cleaning the appliance.
Important! Any food residue must
be removed from the bottom of the
cavity before you start steam assisted
cleaning. Remove all oven
accessories.
The surface of the appliance may be
damaged by some detergents or
cleaning materials. Do not use
aggressive detergents, cleaning
powder, cream or any sharp objects.
The warranty does not cover the
replacement or repair
of rusted or corroded plates.

Bekijk gratis de handleiding van Defy DGS578, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDefy
ModelDGS578
CategorieFornuis
TaalNederlands
Grootte2350 MB