DAP Audio PA-5500SA handleiding
Handleiding
Je bekijkt pagina 13 van 40
3.5. Dimensions
Figure 5
4. Installation
4.1.
Installation Site Requirements
• The device can be used only indoors.•
• The minimum distance to other objects must be bigger than 0,5 m.•
• The maximum ambient temperature t
a
= 40 °C must never be exceeded.•
• The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.•
4.2.
Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 1 rack unit (RU) of space, which is
44,5 mm high.
Make sure that the rack is sufficiently secured to prevent it from becoming unstable or falling over.
To mount the device in a two-post rack, follow the steps below:
01) Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.01)
02) Position the device in front of the rack posts so that the 4 mounting openings (02) on the flanges face the02)
openings on the rack posts with cage nuts.
03) Use a screwdriver to mount the device to the rack posts with 4 screws.03)
4.3.
Connecting the Wireless Antennas
The device is delivered with 2 wireless antennas. The antennas are not connected. To install the antennas:
01) Put the 2 wireless antennas into the Wi-Fi antenna connector (22) and the Bluetooth antenna connector01)
(26).
02) Turn the 2 wireless antennas clockwise to tighten them.02)
03) Make sure that the wireless antennas point up.03)
12
c
Product code: D6176
PA-5500SA
Bekijk gratis de handleiding van DAP Audio PA-5500SA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DAP Audio |
| Model | PA-5500SA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4827 MB |