Dantherm HCV 700 handleiding
Handleiding
Je bekijkt pagina 17 van 60
17
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Product description: General description
en
The product label showing the variant and serial number is located next to the USB
connection.
Fig. 4
This section shows the functions of the dierent parts in drain mode A/B. A is the default
mode.
Duct 1
Duct 2 Duct 4
Duct 3
Drain
mode A
Drain
mode B
Duct 5
Duct 6
Fig. 5
Part Mode A Mode B
Duct connection 1 (Fig. 5) Outdoor air - T1 Extract air - T3
Duct connection 2 (Fig. 5) Supply air - T2 Exhaust air - T4
Duct connection 3 (Fig. 5) Extract air - T3 Outdoor air - T1
Duct connection 4 (Fig. 5) Exhaust air - T4 Supply air - T2
Filter 1 (Fig. 3) Exhaust air lter G4 Supply air lter G4 or F7
Filter 2 (Fig. 3) Supply air lter G4 or F7 Exhaust air lter G4
Fan case 1 (Fig. 3) Extract air fan Supply air fan*
Fan case 2 (Fig. 3) Supply air fan* Extract air fan
* Supply fan case may be tted with an electrical preheater (option)
HCV 300 , 400 and 460 have additional ducts in the bottom (ducts 5 and 6) (Fig. 5) which
are closed by default but can be used as a bottom outlet for supply air (T2). The table below
shows which duct is used as the bottom outlet in mode A/B and which corresponding duct
can be closed at the top of the unit. Both ducts can be used simultaneously if desired.
Option for HCV 300/400/460 only:
Drain mode Bottom outlet Duct may be closed
Mode A Duct 5 Duct 2
Mode B Duct 6 Duct 4
Product label
Description of
drain mode A/B
Bottom outlet
in mode A/B
Bekijk gratis de handleiding van Dantherm HCV 700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dantherm |
| Model | HCV 700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4620 MB |
