Danfoss VACON NXP handleiding
Handleiding
Je bekijkt pagina 72 van 178
•
Related Links
Jumper Selections on the OPTA1 Basic Board
=
A
B
C
e30bg014.10
Illustration 54: Maximum Loads on +24 V/EXT+24 V Output
A
Maximum 150 mA
B
+24 V out
C
Maximum 250 mA
7.3.2.1 Digital Input Signal Inversions
The active signal level is different when the common inputs CMA and CMB (terminals 11 and 17) are connected to +24 V or to
ground (0 V).
The 24 V control voltage and the ground for the digital inputs and the common inputs (CMA, CMB) can be internal or external.
A B
e30bg015.10
DIN1
+24V
GND
DIN2
DIN3
CMA
+24V
GND
DIN1
DIN2
DIN3
CMA
Illustration 55: Positive/Negative Logic
A
Positive logic (+24 V is the active signal) = the input is active when the switch is closed.
B
Negative logic (0 V is the active signal) = the input is active when the switch is closed. Set the jumper X3 to the
position 'CMA/CMB isolated from ground'.
AQ468246143802en-000201 / DPD0088872 | Danfoss A/S © 2023.09
Control Unit
VACON® NXP IP00 Drive Modules
Operating Guide
Bekijk gratis de handleiding van Danfoss VACON NXP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danfoss |
| Model | VACON NXP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20640 MB |
