Handleiding
Je bekijkt pagina 14 van 52
14
INSTALLATION INSTRUCTIONS
• If the appliance is not connected to the mains
with a plug, a all-pole disconnector (with at least
1/8 “ (3 mm) contact spacing) must be used in
order to meet the safety regulations.
• The appliance is designed for a power supply
of 110-120 V. If your supply is different, contact
the authorized service personnel or qualified
electrician.
• The power cable must be long enough to be
connected to the appliance.
• The fused switch must be easily accessible once
the appliance has been installed.
• Ensure all connections are adequately tightened.
• Fix the supply cable in the cable clamp and then
close the cover.
CAUTION: Risk of Electric Shock. If the cord or plug
becomes damaged, disconnect the appliance from
the power supply and replace only with a cord or
plug of the same type.
The power cord of this appliance is equipped with
a three-prong (grounding) plug which mates with
a standard three prong grounding wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
The customer should have the wall receptacle and
circuit checked by a qualified electrician to make
sure the receptacle is properly grounded.
Where a standard two-prong wall receptacle is
encountered, it is the personal responsibility and
obligation of the customer to have it replaced with a
properly grounded three-prong wall receptacle.
Power supply cord
with 3-prong grounding plug
Grauding type
wall receptacle
Ensure proper ground
exists before use
WARNING
DO NOT, UNDER ANY CIRCUMSTANCES, CUT
OR REMOVE THE THIRD (GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER.
DO NOT USE AN EXTENSION CORD
Bekijk gratis de handleiding van Danby DR24V1WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danby |
| Model | DR24V1WH |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6271 MB |