Dali Phantom CI AMP-4750 DSP handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 12 van 16

Zone name - click / touch to edit

Select mono or stereo

Select input

Select zone

Select GPIO volume control mode

Configure zone restrictions

Select compressor mode

and enable if required

Adjust zone volume

Diagram8E

AMP CONFIGURATOR [Zone] tab display

Diagram8C

AMP CONFIGURATOR [Input] EQ display

Diagram8D

AMP CONFIGURATOR [Input] Mix display

8.2 [Zone] Tab

The [Zone] tab enables installation zones to be defined

and named, and provides access to further sub-menus.

Zones might be lounge or dining areas for example, or

dierent rooms in the home. For all [Zone] tab menus,

the installation zone under configuration is selected by

highlighting one of the zone identifiers (A, B, C or D) at the

top of the page. Diagram8E illustrates the [Zone] tab.

• The [Source] menu enables inputs to be assigned

to zones and Input Priori or Input Ducking to be

configured.

• The [Input Priori] function enables an alternative

input to replace and mute the input primarily routed to

the zone under configuration when the alternative input

exceeds a preset level.

• The [Input Ducking] function enables an alternative

input to replace and aenuate the input primarily

routed to the zone under configuration when the

alternative input exceeds a preset level.

• The [GPIO Volume Control] option enables external

volume control to be applied to individual zones.

The [GPIO] configuration menu can be found under the

[Seings] tab.

• The [Restrictions] menu enables zone inputs or input

mixes to be restricted from routing to particular zones.

Note: Routing restrictions cannot be applied to priori

zone inputs.

• The [Compressor] option enables default or custom

signal compression to be applied to individual

installation zones.

NOTE

Compression can be useful to reduce the volume

dierence between loud and quiet audio material. The

lower the compression threshold is set, the more

the dierence between loud and so will be reduced.

The overall zone volume may need to be increased

when compression is used. The default compression

parameters are appropriate for most installations.

[Input Priori] and [Input Ducking] parameters can be

either set to default values, or their [Threshold], [Aack],

[Hold] and [Release] values can be set as required.

[Input Priori] can also be set to ignore the volume level

set for the specified zone and take a specific override

volume.

If an amplifier is controlled via a third-par control

system API, input routing restrictions set via the [Input]

tab will not apply.

Analogue SPDIF Mix Generator

ANALOGUE

Analogue 1

Analogue 2

Mix name - click / touch to edit

Adjust Mix input level

Analogue SPDIF Mix Generator

Analogue 1

Select and adjust required EQ stages

22 23

12345678910111213141516/ 16

Bekijk gratis de handleiding van Dali Phantom CI AMP-4750 DSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd