Dali Phantom CI AMP-4750 DSP handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 11 van 16

8. Advanced Configuration

The [Dashboard] displays the amplifier status, output

zones and the configuration menu tabs. It also enables

immediate access to volume control. The advanced

functions available under each configuration menu tab

are described in the following paragraphs.

8.1 AMP CONFIGURATOR

[Input] Tab

The [Input] tab provides the following configuration

parameters for each amplifier input channel:

• Input name

• Mono/Stereo selection

• Input sensitivi

• High-pass filter

• Gain trim

• Five band equalisation

The [Input] tab also enables input signals to be mixed and

routed to specific amplifier zones.

Diagram8B

AMP CONFIGURATOR [Input] tab display

Diagram8A

AMP CONFIGURATOR [Dashboard] display

In addition to the installation of DALI presets described in

Section5.3 of this manual, the DALI PHANTOM CI AMP-

4750 DSP can be further configured to meet a varie of

more advanced installation requirements. The advanced

configuration options are described in the following

paragraphs.

Adjustment of AMP-4750 DSP advanced

configuration parameters demands specialist

knowledge and should only be carried-out by

appropriately qualified audio technicians.

Begin by connecting the AMP-4750 DSP to a network

enabled device such as a smart phone, tablet or

computer. Open a web browser on the connected

device and browse to the DALI PHANTOM CI AMP

CONFIGURATOR interface. The AMP CONFIGURATOR

Dashboard, illustrated in Diagram8A, will be displayed.

NOTE

AMP-4750 DSP network connection is described in

Section5.2 of this manual.

The mix function enables any amplifier input, including

stereo or split mono S/PDIF inputs, to be grouped with

any other input or inputs to create multiple predefined

mixes.

NOTE

The number of individual mixes possible is equal to the

number of amplifier analogue inputs.

Mix inputs are muted by default with their level

adjustment sliders set to zero. Mix operations take place

following high-pass filter, input equalisation and mono/

stereo selection.

A pink noise or sine wave audio signal generator,

appropriate for audio system testing and set up, can also

be enabled, disabled, and adjusted for gain and frequency

via the [Input] tab.

NOTE

When adjusting input gain, the input level display should

remain green. If it displays red, the input gain should be

reduced.

Input name - click / touch to edit

Adjust input gain

Select mono or stereo

Select input sensitivi option

Open EQ window

Analogue SPDIF Mix Generator

Analogue 1

Analogue 2

Input is Analogue 2

Input is Analogue 1

20 21

12345678910111213141516/ 16

Bekijk gratis de handleiding van Dali Phantom CI AMP-4750 DSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd