Handleiding
Je bekijkt pagina 11 van 49
Page 11
Active Clean function (Multi-Zone Systems
models do not have this function)
The Active Clean Technology washes away
dust when it adheres to the heat exchanger by
automatically freezing and then rapidly thaw-
ing the frost. A “pi-pi” sound will be heard.
The Active clean operation is used to produce
more condensed water to improve the cleaning
eect, and the cold air will blow out. After
cleaning, the internal wind wheel then keeps
operating with hot air to blow-dry the evapora-
tor, thus keeping the inside clean.
- When this function is turned on, the indoor
unit display window appears “CL ” , after 20 to
130 minutes, the unit will turn o automatically
and cancel Active Clean function.
- For some units, the system will start high
temperature cleaning process, and the tem-
perature of air outlet is very high.
Please keep away from it. And this would lead
to the rising of the room temperature .horizon-
tal louver settings.
Lifting panel operation
In the stand-by mode, press the “Mode” and
“Down” buttons for 3 seconds at the same
time, the remote controller enters the setting
panel state, and the remote controller displays
"F2". When setting the panel status, press the
“Up” or “Down” buttons of the remote control-
ler to control the rise or fall of the grille, and
press any other button to exit the setting.
The up and down height of the panel can reach
a maximum of 1.5 meters. During the decline, if
the grille is raised by the obstacles, it will stop.
During the ascending process, if the grille is
blocked and does not rise to the correct height
or a finger is pinched, it will automatically
descend after a period of time and then
ascend. If the grille is bocked for the third
times, then the display panel will report an
error and prompt for manual processing.
Breeze Away
This feature avoids direct air flow blowing on
the body and make you feel indulging in silky
coolness.
Energy Saving Tips
• DO NOT set the unit to excessive temperature levels.
• While cooling, close the curtains to avoid direct sunlight.
• Doors and windows should be kept closed to keep cool or warm air in the room. • DO NOT place
objects near the air inlet and outlet of the unit.
• Clean the air filter every two weeks.
• Adjust louvers properly and avoid direct airflow.
• Closing curtains during heating also helps keep the heat in.
• Doors and windows should be kept closed.
Bekijk gratis de handleiding van Daizuki DX1C12426-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daizuki |
| Model | DX1C12426-22 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6253 MB |
