Handleiding
Je bekijkt pagina 10 van 49
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air filters.
Features
Default Setting
When the air conditioner restarts after a power
failure, it will default to the factory settings
(AUTO mode, AUTO fan, 24°C (76°F)). This
may cause inconsistencies on the remote
control and unit panel. Use your remote control
to update the status.
Auto-Restart
In case of power failure, the system will imme-
diately stop. When power returns, the Opera-
tion light on the indoor unit will flash. To
restart the unit, press the ON/OFF button on
the remote control. If the system has an auto
restart function, the unit will restart using the
same settings.
Three-minute protection feature
A protection feature prevents the air condi-
tioner from being activated for approximately
3 minutes when it restarts immediately after
operation.
Louver Angle Memory Function
Some models are designed with a louver angle
memory function. When the unit restarts after
a power failure, the angle of the horizontal
louvers will automatically return to the previ-
ous position.
The angle of the horizontal louver should not
be set too small as condensation may form and
drip into the machine. To reset the louver,
press the manual button, which will reset the
horizontal louver settings.
Refrigerant Leak Detection System
(Multi-Zone Systems models do not have this
function)
In the event of a refrigerant leak, the LED
DISPLAY will display refrigerant leak error
code and the LED indicator light will flash.
Sleep Operation
The SLEEP function is used to decrease energy
use while you sleep (and don’t need the same
temperature settings to stay comfortable). This
function can only be activated via remote
control. And the Sleep function is not available
in FAN or DRY mode.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C (2°F) after 1
hour, and will increase an additional 1°C (2°F)
after another hour.
When in HEAT mode, the unit will decrease the
temperature by 1°C (2°F) after 1 hour, and will
decrease an additional 1°C (2°F)after another
hour.
The sleep feature will stop after 8 hours and
the system will keep running with final situa-
tion.
SLEEP Operation
Set
Temperature
Keep
Running
Cool model (+1ºC/2ºF) per hour
for the first two hours
Heat model (-1ºC/2ºF) per hour
for the first two hours
1hr 1hr
saving energy during sleep
Page 10
Bekijk gratis de handleiding van Daizuki DX1C12426-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daizuki |
| Model | DX1C12426-22 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6253 MB |
