Handleiding
Je bekijkt pagina 29 van 75
24
(1) Long press “FUNCTION” button for 5s and the temperature
zone displays “C00”; long press “FUNCTION” button for
another 5s to enter the interface of setting wired controller
parameters. “P00” is displayed in temperature zone;
(2) Press “+” or “-” button to select parameter code. Press
“MODE” button to enter parameter setting. At that time,
parameter value is blinking. Press “+” or “-” button to
adjust the parameter value and press “ENTER” button to
nish setting.
(3) Press “ENTER” button to return to last step until exists
setting parameters.
The parameter setting list is as following:
Table 4.2 Parameter setting list
Parameter
code
Parameter
name
Parameter
range
Default
value
Note
P10
Set master
indoor unit*
00: do not
change current
master/slave
state
01: set current
indoor unit as
master indoor
unit
00
When set the
corresponding
indoor unit of
wired controller
as master indoor
unit, the “
” icon
will be bright after
nishing setting.
NOTE: not
applicable to partial
units.
Bekijk gratis de handleiding van Daitsu DS 18KDB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daitsu |
| Model | DS 18KDB |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4119 MB |
