Daikin VKM50GBV1 handleiding
Handleiding
Je bekijkt pagina 9 van 20
3P130767-4K English 5
35 Air conditioner fan speed control button
Press this button to select the fan speed of air conditioner
combined with this unit.
36 Air flow direction adjust button
Press this button to select the air flow direction of air con-
ditioner combined with this unit.
37 Filter sign reset button
Refer to “4.1 WHEN TO PERFORM MAINTENANCE OF
THE AIR FILTER”.
(Refer to page 9)
NOTE
• In contradistinction to actual operating situations, the display
on figure 3 shows all possible indications.
•
If the filter sign lamp lights up, clean the air filter as explained in
the chapter
“4
MAINTENANCE”
. After cleaning and reinstalling
the air filter: press the filter sign reset button on the remote con-
troller. The filter sign lamp on the display will go out.
•
Only the items marked with an asterisk (
mark) are explanation
relating to the functions and display of the unit.
Unmarked items are functions of the combined air conditioners.
2.3 EXPLANATION FOR SYSTEMS
This unit can be made a part of two different systems: as
part of the combined operation system used together with
VRVII SYSTEM Air Conditioners and as the independent
system using only the Heat Reclaim Ventilator. An operat-
ing remote controller is required when using the unit as an
independent system.
Ask your local dealer for what kind of your system is set
up before operation.
For the operation of the remote controller for indoor unit
and centralized controller, refer to the operation manual
provided with each unit.
See the included operating manuals for details on how to
operate each remote control.
OPERATION FOR EACH SYSTEM
Sample system (Refer to figure 2)
Combined operation system with VRVIII systems
[Operation]
The air conditioner remote controller starts and stops the air
conditioner and the Heat Reclaim Ventilator unit.
You can also select the ventilation amount and the ventilation mode.
Refer to
“3 OPERATION PROCEDURE”
.
During intermediate periods when only the Heat Reclaim Venti-
lator unit is used without the air conditioner, select “ventilation”
with the operation selection button. (Refer to 2.4)
Sample system (Refer to figure 2)
Independent system
[Operation]
The Heat Reclaim Ventilator unit can be started and stopped using
the remote controller.
You can also select the ventilation amount and the ventilation mode.
Refer to
“3 OPERATION PROCEDURE”
.
NOTE
• This unit cannot control room temperature. If this is needed,
do not install the Heat Reclaim Ventilator unit alone, but
rather install another indoor unit.
2.4 ABOUT DIRECT DUCT CONNECTION SYSTEM
Installation Examples
Direct duct connection system
Independent duct system
The Heat Reclaim Ventilator unit cannot be operated inde-
pendently when the air conditioner is connected to the
Heat Reclaim Ventilator unit via a duct. When using the
Heat Reclaim Ventilator unit, set the air conditioner to
“fan” mode on weak fan strength.
• Each time you press the operation selection button, the
operation mode display will change as shown in the figure
below.
(HC0007)
NOTE) •The system must be operated interlocking
with the air conditioner.
• Do not connect to the outlet side of the indoor unit.
(HC0008)
Operation mode display
“Ventilation” is displayed.
Operation mode
selector button
Remote controller
for indoor unit
01_EN_3P130767-4K.fm 5 ページ ２０１３年３月２１日 木曜日 午前１１時５０分
Bekijk gratis de handleiding van Daikin VKM50GBV1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | VKM50GBV1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2744 MB |
