Handleiding
Je bekijkt pagina 18 van 54
D-EOMZC00204-18_04EN 18/54
Parameter
Default
Range
Quiet Mode
Disable
Disable,
Enable
QM Start Hr
(QMS)
21h
0…24h
QM Start Min
0min
0...60min
QM End Hr
(QME)
6h
0…24h
QM End Min
0min
0…60min
QM Cond Offset
(CO)
5°C
0…10°C
4.1.9 Scheduler
Unit On/Off can be managed automatically through the function Time Scheduler enabled when the parameter Unit Enable
is set to Scheduler.For each day of the week user can define six time slots and choose for each time slot one of following
mode:
Parameter
Description
Off
Unit Off
On Setpoint 1
Unit On and Cool LWT 1 is the active setpoint
On Setpoint 2
Unit On and Cool LWT 2 is the active setpoint
4.2 Unit/Circuit Start-up
In this section, starting and stopping sequence of the unit will be described. status will be briefly described to allow a better
understanding of what is going on into the chiller control.
4.2.1 Prepare the unit to start
4.2.1.1 Unit Enable
The unit starts only if all the enable setpoints/signals are active:
• Unit Switch Enable (signal) = Enable
• Keypad Enable (setpoint) = Enable
• BMS Enable (setpoint) = Enable
Switch Enable
Software Enable
BMS
Enable
Unit Status
Q0
State
Chiller Enable
(KeyPad Enable set
point)
Control Source
(Set point)
BAS
request
0
X
X
X
X
DISABLED
LOCAL
X
Disable
X
X
DISABLED
LOCAL
X
X
Network
DISABLE
DISABLED
LOCAL
X
Enable
Local
X
ENABLED
LOCAL
X
Enable
Network
ENABLE
ENABLED
REMOTE
Open
X
X
X
DISABLED
REMOTE
X
Disable
X
X
DISABLED
REMOTE
Closed
Enable
Network
DISABLE
DISABLED
REMOTE
Closed
Enable
Local
X
ENABLED
REMOTE
Closed
Enable
Network
ENABLE
ENABLED
0
QME
Evap T
LWT SP
LWT SP + MR
QMS
time
CP SP
CP SP + CO
Cond Press
Bekijk gratis de handleiding van Daikin EWYS5004Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWYS5004Z |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7564 MB |
