Daikin EWYD360BZSL handleiding
Handleiding
Je bekijkt pagina 70 van 82
D–EOMCP00104-14EN - 70/82
B.2. Upload from programming key
To upload the program using the Carel programming key it is necessary first to upload the
program to the key and then to download it on one ore more controllers. The same procedure has to
be used for both operations just selecting the right position on the key commuter:
Commuter
position
Transfer type
1 (green light) key programming from pCO
3
2 (red light) pCO
3
programming from key
The procedure is described in the following.
-
disconnect the controller from pLAN and to set the net address to 0
-
select the right commuter position
-
insert the key in the “expansion memory” connection (remove the cover if necessary)
-
press “up” and “down” keys at the same time and switch on the controller
-
press “enter” key to confirm the operation
-
wait until the controller boot
-
turn off the controller
-
remove the key.
In the case no controller with the program installed is available, the key may be programmed
using the same procedure described for the direct upload from a PC. In this case, with the key
inserted in the controller and the commuter in position 2 (red light) the program will write on the
key instead of on the controller.
Bekijk gratis de handleiding van Daikin EWYD360BZSL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWYD360BZSL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10110 MB |
