Daikin EWWS490VZXSA1 handleiding
Handleiding
Je bekijkt pagina 25 van 67
D-EOMZC00106-17_07EN - 25/67
4.8 Unit Mode
This item shows the present Operating Mode and jumps to the page for unit mode selection.
Setpoint/Sub-Menu
Default
Range
Description
VZ
Available Modes=
Cool
Cool,
Cool w/ Glycol,
Cool/Ice w/ Glycol,
Ice w/ Glycol,
Heat/Cool,
Heat/Cool w/Glycol,
Heat/Ice w/Glycol,
Pursuit,
Test
Available operating modes
Depending on selected mode among availables, the Unit Mode on the main menu will assume the corresponding value
according to the following table:
Available mode selected
Operating Mode
VZ
C/H Switch = Cool
C/H Switch = Heat
Cool
Cool
N/A
Cool w/ Glycol
Cool/Ice w/ Glycol
Ice w/ Glycol
Ice
Heat/Cool
Cool
Heat
Heat/Cool w/Glycol
Heat/Ice w/Glycol
Ice
Pursuit
Pursuit
Test
Test
4.9 Unit Enable (A/C Units only)
This page allows to enable or disable unit and circuits. For the unit it also possible enable the operation with time scheduler,
while for circuit it is possible to enable the test mode.
Setpoint/Sub-Menu
Default
Range
Description
Unit
Enable
Enable, Disable, Scheduler
Unit enable command
Circuit #1
Enable
Enable, Disable, Test
Circuit #1 enable command
Circuit #2
Enable
Enable, Disable, Test
Circuit #2 enable command
4.10 Timers
This page indicates the remaining cycle timers for each circuit and the remaining staging timers. When the cycle timers
are active any new start of a compressor is inhibited.
Setpoint/Sub-Menu
Default
Range
Description
C1 Cycle Tm Left=
0s
-
Circuit 1 cycle timer
C2 Cycle Tm Left=
0s
-
Circuit 2 cycle timer
C1 Cycle Tmr Clr=
Off
Off, On
Clear circuit 1 cycle timer
C2 Cycle Tmr Clr=
Off
Off, On
Clear circuit 2 cycle timer
Stg Up Dly Rem=
0s
-
Remaining delay to next compressor start
Stg Dn Dly Rem=
0s
-
Remaining delay to next compressor stop
Clr Stg Delays=
Off
Off, On
Clear remaining delays to next compressor start/stop
Ice Cycle Rem=
0min
-
Remaining Ice cycle delay
Clr Ice Dly
Off
Off, On
Clear remaining delay for Ice mode
4.11 Alarms
This link jumps to the same page accessible with the Bell button. Each of the items represents a link to a page with different
information. The information shown depends on the abnormal operating condition that caused the activation of unit, circuit
or compressor safeties. A detailed description of the alarms and how to handle will be discussed in the section 6.
Setpoint/Sub-Menu
Default
Description
Alarm Active
List of the active alarms
Alarm Log
History of all the alarms and acknowledges
Event Log
List of the events
Alarm Snapshot
List of alarm snapshots with all the relevant data recorded at time the alarm occurred.
Bekijk gratis de handleiding van Daikin EWWS490VZXSA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWWS490VZXSA1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9055 MB |
