Handleiding
Je bekijkt pagina 47 van 84
Air cooled inverter water chiller
OPERATION
MANUAL
EWAD TZ B 160-700
Air cooled inverter water chiller
D-EOMAC00909-16EN
Operation Manual
47
Parameter
Default
Range
Quiet Mode
Disable
Disable, Enable
QM Start Hr (QMS)
21h
0…24h
QM Start Min
0min
0...60min
QM End Hr (QME)
6h
0…24h
QM End Min
0min
0…60min
QM Cond Offset (CO)
5°C
0…10°C
The Quiet Mode may affect negatively chiller efficiency due to the increased condenser
setpoint.
5.1.8 Scheduler
Unit On/Off can be managed automatically through the function Time Scheduler enabled when the
parameter Unit Enable is set to Scheduler 4.8. For each day of the week user can define six time
slots and choose for each time slot one of following mode:
Off
Unit Off
On Setpoint 1
Unit On and Cool LWT 1 is the active setpoint
On Setpoint 2
Unit On and Cool LWT 2 is the active setpoint
5.2 Unit/Circuit Start-up
In this section, starting and stopping sequence of the unit will be described. All HMI status will be
briefly described to allow a better understanding of what is going on into the chiller control.
5.2.1 Prepare the unit to start
In order to let the unit start all the enable signals has to be changed to enable. The list of enabling
signals are:
Local/Remote Enable signals = Enable
Keypad Chiller Enable = Enable
BMS Chiller Enable Setpoint = Enable
These items will be now discussed. Each unit is equipped with a Local/Remote selector. It is
installed on the unit switchbox and can be positioned on three different positions: Local, Disable,
Remote as shown in the following picture:
0
QME
Evap T
LWT SP
LWT SP + MR
QMS
time
CP SP
CP SP + CO
CondPress
Bekijk gratis de handleiding van Daikin EWAD620TZPLB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EWAD620TZPLB |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 11976 MB |
