Daikin EPVX14SU23A handleiding
Handleiding
Je bekijkt pagina 6 van 20
5 Operation
Operation manual
6
EPVX10+14S(U)18+23A + EPBX10~14A
Daikin Altherma 4 H F+W
4P773378-1 – 2024.11
2 Adjust the desired leaving water temperature:
11:05 21.0°C
Scheduled next
Main zone
Set temperature to…
35
To change the weather-dependent curve for the space heating/
cooling zones
1 Go to the applicable zone:
Zone Go to …
Main zone – Heating [1.8] Main zone > Heating WD
curve
Main zone – Cooling [1.9] Main zone > Cooling WD
curve
Additional zone – Heating [2.8] Additional zone >
Heating WD curve
Additional zone – Cooling [2.9] Additional zone >
Cooling WD curve
2 Change the weather-dependent curve.
Y1
Y2
X1 X2
X1, X2 Outdoor ambient temperature
Y1, Y2 Desired leaving water temperature
More information
For more information, see also:
▪ "5.4Turning operation ON or OFF"[410]
▪ "5.6Space heating/cooling control"[410]
▪ "5.8Schedule screen: Example"[413]
▪ "5.9Weather-dependent curve"[414]
▪ User reference guide
4.3 Domestic hot water
Tank heating operation
NOTICE
Disinfection mode. Even if you turn OFF tank heating
operation, disinfection mode will remain active.
NOTICE
It is recommended to set disinfection mode to once a day
(setting [4.10] Disinfection > Every day).
1
In the home screen, tap the icon in the Domestic hot
water bar.
Result: When OFF, the Domestic hot water screen area is
greyed out.
To change the tank temperature setpoint
In Reheat only and Schedule + reheat mode, you can use the
tank temperature setpoint screen to adjust the domestic hot water
temperature.
1 Go to [4.5]: Tank > Reheat setpoint.
2 Adjust the domestic hot water temperature:
11:05 21.0°C
Scheduled next
Reheat setpoint
Set temperature to…
50
Note: In Schedule only mode, you can modify the settings for:
[4.3] Manual setpoint and [4.4] Powerful operation setpoint.
More information
For more information, see also:
▪ "5.4Turning operation ON or OFF"[410]
▪ "5.7Domestic hot water control"[411]
▪ "5.8Schedule screen: Example"[413]
▪ User reference guide
5 Operation
5.1 User interface: Overview
The user interface has the following components:
b
a
a Status indicator
b Touch screen display
a
b
a Status indicator
b Touch screen display
Status indicator
The LEDs of the status indicator light up or blink to show the
operating mode of the unit.
LED Mode Description
Blinking blue Standby The unit is not in operation.
Continuous blue Operation The unit is in operation.
Blinking red Malfunction A malfunction occurred.
See "8.1To display the help text
in case of a malfunction"[416]
for more information.
Touchscreen display
The backlight of the touchscreen dims after two minutes of non-
interaction with the user interface, and turns off when three minutes
have passed. Tapping the touchscreen turns the backlight back on.
Touch gestures
Interaction with the touchscreen display can be done with the
following gestures:
Bekijk gratis de handleiding van Daikin EPVX14SU23A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EPVX14SU23A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3173 MB |
