Daikin EKRRVATR2BA handleiding
Handleiding
Je bekijkt pagina 39 van 52
9 | Appendix
Application Guide
39
EKRACP* + EKRCTR* + EKRMIB* + EKRRVA* + EKRSEN* + EKRSIB* +
EKRUFH*
Daikin Home Controls
4P701747-1A – 2023.10
Result: Connection mode remains activated for 3 minutes.
4 Long press the system button of the accessory you want to connect until the
LED starts to flash orange.
Result: If connecting was succesful, the LED lights up green. If connecting failed,
the LED lights up red. Try again.
To connect a DHC Room Thermostat — 1
It is possible to add a DHC Room Thermostat — 1 to a room. This provides a more
efficient way to regulate the room temperature, because you can place the
accessory where you want the temperature to be monitored.
To connect a DHC Room Thermostat — 1 to a DHC Radiator Thermostat, the
connection mode of both accessories has to be activated. To do this, proceed as
follows:
1 Open the battery compartment of the DHC Room Thermostat — 1 using a
slotted screwdriver to loosen the wall mounting plate.
1
2
2 Remove the insulation strip from the battery compartment.
3 Long press the system button until the LED starts to flash orange.
Result: Connection mode remains activated for 3 minutes.
4 Long press the system button of the accessory you want to connect until the
LED starts to flash orange.
Result: If connecting was succesful, the LED lights up green. If connecting failed,
the LED lights up red. Try again.
Bekijk gratis de handleiding van Daikin EKRRVATR2BA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKRRVATR2BA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7259 MB |
