Daikin EKRRVATR2BA handleiding
Handleiding
Je bekijkt pagina 36 van 52
9 | Appendix
Application Guide
36
EKRACP* + EKRCTR* + EKRMIB* + EKRRVA* + EKRSEN* + EKRSIB* +
EKRUFH*
Daikin Home Controls
4P701747-1A – 2023.10
1 2 3 4 5 6 7 8 9 10
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x
Result: The channel LED lights permanently for the corresponding channel.
2 Long press the system button of the DHC Floor Heating Controller until the
LED quickly starts flashing orange.
3 Long press the system button of the DHC Room Thermostat — 2 until the LED
quickly starts flashing orange.
Result: If connecting was succesful, the LED lights up green. If connecting failed,
the LED lights up red. Try again.
To connect the DHC Floor Heating Controller to a DHC Basic IO Box
INFORMATION
ALWAYS keep a minimum distance of 50cm between the accessories.
INFORMATION
You can cancel the connecting procedure by briefly pressing the system button again.
This will be indicated by the accessory LED lighting up red.
INFORMATION
If no connecting operations are carried out, connection mode is exited automatically
after 3 minutes.
If you want to connect the DHC Floor Heating Controller to a DHC Basic IO Box, the
connection mode of both accessories has to be activated first. To do this, proceed
as follows:
1 Press the select button of the DHC Floor Heating Controller briefly until the
LEDs of all channels light up green.
Bekijk gratis de handleiding van Daikin EKRRVATR2BA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | EKRRVATR2BA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7259 MB |
