Daikin DCM002A51 handleiding

Niet gecategoriseerd

Daikin

369 pagina's

PDF beschikbaar

Handleiding

/ 369

Je bekijkt pagina 337 van 369

User’s Manual EM11A015H

intelligent Touch Manager

336

Setting

location

Item Setting details

Possible range [

: Visible, : Conditionally visible, × : Invisible]

Remarks

Management point type

Indoor Ventilator Chiller

Dio

Analog

(Ao)

MultiState

(Mo)

outdoor

Indoor unit Hydrobox

AHU

Ventilator

D3Chiller InvChiller Chiller

A/C tab

Airow Direction

Airow direction 0

× × × × × × × × × ×

Airow direction 1

× × × × × × × × × ×

Airow direction 2

× × × × × × × × × ×

Airow direction 3

× × × × × × × × × ×

Airow direction 4

× × × × × × × × × ×

Swing

× × × × × × × × × ×

Timer Extension

× × × × × ×

OFF

× × × × × ×

Setpoint Restriction

Cooling Limit

Enable/Disable

Enable

*9 *9*16 × × × × × × × × ×

Disable

*9 *9*16 × × × × × × × × ×

MAX

Celsius Example: 32°C

*7*9 *7*9*16 × × × × × × × × ×

Fahrenheit Example: 90°F

*7*9 *7*9*16 × × × × × × × × ×

MIN

Celsius Example: 16°C

*7*9 *7*9*16 × × × × × × × × ×

Fahrenheit Example: 60°F

*7*9 *7*9*16 × × × × ×

× × ×

Heating Limit

Enable/Disable

Enable

*9 *9*16 × × × × ×

× × ×

Disable

*9 *9*16 × × × × ×

× × ×

MAX

Celsius Example: 32°C

*7*9 *7*9*16 × × × × ×

× × ×

Fahrenheit Example: 90°F

*7*9 *7*9*16 × × × × ×

× × ×

MIN

Celsius Example: 16°C

*7*9 *7*9*16 × × × × ×

× × ×

Fahrenheit Example: 60°F

*7*9 *7*9*16 × × × × ×

× × ×

Ventilator tab

Ventilation Amount

Auto (normal) × × ×

*3*4 × × × × × × ×

When Ventilation

Mode is disabled

for the selected

Ventilator

management point,

the tab itself is

hidden.

Low (normal) × × ×

*3 × × × × × × ×

High (normal) × × ×

*3 × × × × × × ×

Auto (fresh up) × × ×

*3*4*5 × × × × × × ×

Low (fresh up) × × ×

*3*5 × × × × × × ×

High (fresh up) × × ×

*3*5 × × × × × × ×

Ventilation Mode

Automatic × × ×

*3 × × × × × × ×

ERVentilation × × ×

*3 × × × × × × ×

Bypass × × ×

*3 × × × × × × ×

Dio, Ao, Mo tab

Repeat Mode

Enable/Disable

Enable × × × × × × ×

× × ×

Disable × × × × × × ×

× × ×

Interval

1 × × × × × × ×

× × ×

2 × × × × × × ×

× × ×

3 × × × × × × ×

× × ×

4 × × × × × × ×

× × ×

5 × × × × × × ×

× × ×

6 × × × × × × ×

× × ×

7 × × × × × × ×

× × ×

8 × × × × × × ×

× × ×

9 × × × × × × ×

× × ×

10 × × × × × × ×

× × ×

Analog Example: 0.00 × × × × × × × ×

× ×

MultiState Value

Example: Cool/Heat

Recovery

× × × × × × × × ×

Cannot be set up

for areas.

HW Supply tab

On/Off(Reheat)

Start ×

× × × × × × × × ×

Stop ×

× × × × × × × × ×

Low Noise

On ×

× × × × × × × ×

Off ×

× × × × × × × ×

Storage Water

Setpoint

Celsius Example: 32°C ×

× × × × × × × × ×

Fahrenheit Example: 90°F ×

× × × × × × × × ×

Other tab

Outer Low Noise

On (On)

Schedule setup

only.

Off (Off)

Capacity value (%)

100

*1 Not displayed when Setback Control is disabled.

*2 Not displayed when Operation Mode (Dry) is disabled.

*3 Not displayed when Ventilation Mode is disabled.

*4 displayed when Ventilation Amount/Auto Air Volume is disabled.

*5 Not displayed when Ventilation fresh up is disabled.

*6 The value will be displayed in set unit, upper/lower limit range, displayed accuracy.

*7 Displayed in °C or °F depending on the unit selected in the System Settings.

*8 Not displayed when R/C Prohibition is disabled in the Service Settings with the central device connected.

*9 Not displayed when Setpoint Restriction is disabled in the Service Settings with the central device connected.

*10 Not displayed when the lter sign is OFF.

*11 Grayed out when Operation Mode is Dry.

*12 Grayed out when Operation Mode is Dry or Fan.

*13 Start/stop of the water heater cannot be controlled.

*14 Start/stop of the water heater behaves as well as “Permitted”.

*15 The storage setpoint is changeable.

*16 The leaving water setpoint and storage setpoint are out of scope.

*17 Not displayed for a heating-only Chiller.

*18 Not displayed for a cooling-only Chiller.

*19 The range of temperatures that can be set up for Setpoint depends on the Chiller model. If a value outside the range is specied from the iTM, it may not be reected in the setting.

*20 The range of temperatures that can be set up for Setpoint depends on the AHU model. If a value outside the range is specied from the iTM, it may not be reected in the setting.

*21 Not displayed when the Dust Alarm is not displayed.

*22 Setting is allowed only when areas that include management points are selected.

Not displayed when management points are selected.

*23 R32 Alarm status: Setting is allowed only for detected management points (not displayed when areas are selected).

/ 369

Bekijk gratis de handleiding van Daikin DCM002A51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.