Daikin DCM002A51 handleiding
Handleiding
Je bekijkt pagina 318 van 369
User’s Manual EM11A015H
intelligent Touch Manager
317
■
If authentication is unsuccessful, the reason may be one of the following.
(1) The password may be incorrect
Please input the correct password.
(2) The user with that username may already be logged in
Please log in as a different user.
(3) If attempting to log in as a general user, the upper limit of simultaneously logged in users
(16users) may be exceeded
Please wait for one of the users to log out, then try to log in again.
(4) An incorrect password may have been entered repeatedly
Please wait about 5 minutes, then try to log in again.
<About Power Proportional Distribution function>
■
“PPD” icon is not displayed.
The Power Proportional Distribution function is not enabled. Consult your authorized dealer.
■
About standby power
“Standby power” in the Power Proportional Distribution result displays the total of the crank case
heater power consumed by an air conditioner in a standby state, because it cannot be distributed
to any other air conditioner when it is set up not to distribute the power.
This total power needs to be separately handled as common utility expenses etc.
■
To display the power consumption by tenant
The iTM unit displays the power consumption by air conditioner or by area in the Power
Proportional Distribution result.
■
To convert the power consumption into power charges
The iTM unit does not support the conversion of the power consumption into power charges.
■
To print the Power Proportional Distribution result
The iTM unit does not have the print function.
Bekijk gratis de handleiding van Daikin DCM002A51, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | DCM002A51 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42737 MB |
