Daikin BRP069A62 handleiding
Handleiding
Je bekijkt pagina 14 van 52
4 | Preparation
Installer reference guide
14
BRP069A61+BRP069A62
Daikin Altherma LAN adapter
4P464229-1E – 2023.11
4 Preparation
4.1 Installation site requirements
INFORMATION
Also read the maximum cable length requirements set out in "4.2 Overview of
electrical connections"[415].
▪ Mind the following spacing installation guidelines:
>30 mm >30 mm
>90 mm
(a)
>160 mm
(b)
a Provide enough space to connect the Ethernet cable without exceeding its
minimum bend radius (typically 90mm)
b Provide enough space to open the casing with a flat-blade screwdriver (typically
160mm)
▪ The LAN adapter is designed to be wall-mounted in dry, indoor locations only.
Make sure the installation surface is a flat and vertical non-combustible wall.
▪ The LAN adapter is designed to be mounted in the following orientation only:
with the PCB on the right-hand side in the casing, and the Ethernet connector
facing the floor.
▪ The LAN adapter is designed to operate in ambient temperatures ranging from
5~35°C.
Do NOT install the adapter in the following places:
▪ In places with high humidity (max. RH=95%), such as bathrooms.
▪ In places where frost is possible.
▪ The controller is designed to be wall-mounted in dry, indoor locations only.
▪ Make sure the installation surface is a flat and vertical non-combustible wall.
▪ Mind the spacing installation guidelines as defined in Figure 8. When mounting
multiple controllers in close proximity to each other, ensure a minimum of 5mm
space between the different controllers.
Bekijk gratis de handleiding van Daikin BRP069A62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | BRP069A62 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6620 MB |
