Dahua Technology N83BP83 handleiding
Handleiding
Je bekijkt pagina 81 van 241
Operation Manual
67
After Post-Record is configured, alarm recording continues for an extended period after the
alarm ends.
Figure 6-55 Record linkage
6.5.1.2.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots
when an alarm is triggered.
Prerequisites
After the corresponding alarm type (Normal, Motion, or Alarm) is enabled, the snapshot
channel links capturing picture. For details, see "10.3 Setting Record Plan".
Procedure
On the Alarm page, click to enable snapshot linkage, and select the channel as needed.
Figure 6-56 Snapshot linkage
6.5.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the Alarm page, click to enable alarm-out linkage, select the channel as needed, and
then configure Post alarm.
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
Figure 6-57 Alarm-out linkage
6.5.1.2.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "6.3.5 Email".
Bekijk gratis de handleiding van Dahua Technology N83BP83, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N83BP83 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 39346 MB |
