Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 169 van 228
156
Parameter Description
Snap Mode
●
Optimized Snapshot
: Capture the clearest picture within the
configured time after the camera detects face.
●
Recognition Priority
: Repeatedly compare the captured face to
the faces in the armed face database, and capture the most similar
face image and send the alarm. It is recommended to use this
mode in access control scene.
Click
Advanced
to set the optimized time.
Attribute
Select the
Attribute
checkbox, and click to set the display of
face attribute during the face detection.
Advanced
●
Snapshot Angle Filter
: Set snapshot angle to be filtered during
the face detection.
●
Snapshot Sensitivity
: Set snapshot sensitivity during the face
detection. It is easier to detect face with higher sensitivity.
●
Optimized Time
: Set a time period to capture the clearest picture
after the camera detects face.
Enable Face Exposure
Select the
Enable Face Exposure
checkbox. When a face is detected,
the camera can enhance brightness of the face to make the face image
clear.
Face Target Brightness Set the face target brightness. It is 50 by default.
Face Exposure
Detection Interval
Set the face exposure detection interval to prevent image flickering
caused by constant adjustment of face exposure. It is five seconds by
default.
Pixel Counter
Click
Draw Target
next to
Pixel Counter
, and then press and hold the
left mouse button to draw a rectangle, the
Pixel Counter
then displays
its pixel.
Step 7 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 8 Click
Save
.
5.10.2 Setting Face Database
By setting face database, the face database information can be used to compare with the face
detected.
Face database configuration includes creating face database, adding face picture, and face
modeling.
5.10.2.1 Creating Face Database
Face database includes face picture, face data and other information. It also provides comparison
data for the captured face pictures.
Step 1 Select
Setting
>
Event
>
Face Recognition
>
Face Database Config
.
Capacity Limit
: Shows the usage of the memory.
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
