Dahua Technology N42DJS2 handleiding
Handleiding
Je bekijkt pagina 145 van 228
132
view.
3) Click .
You need at least 4 pairs of calibration boxes to ensure the views of the speed dome
and the panoramic camera as similar as possible.
Step 3 Click
Save
.
5.2.2 Enabling Alarm Track
Alarm Track is disabled by default. Smart Track is enabled only after Alarm Track is enabled and
intelligent rules of the panoramic camera are configured. Smart Track is supported only when rules
of crowd map, intrusion and tripwire are triggered. See "5.8 Setting IVS" and "5.9 Setting Crowd
Map".
Step 1 Select
Setting
>
Event
>
Smart Track
>
Alarm Track
.
Figure 5-19 Alarm track
Step 2 Select the
Enable
checkbox to enable track linkage.
After enabling the function, manual positioning, manual tacking and auto tracking take
effect.
Step 3 Set parameters.
Table 5-3 Description of alarm track parameters
Parameter Description
Auto Track
Select
On
, and the speed dome automatically links to a corresponding
position and tracks an object when the intelligent rules of the
panoramic camera trigger alarms.
Track Time
Set the alarm track time.
ā
Before an object disappears: The speed dome would
automatically link to a corresponding position and tracks an
object until the object moves out of the monitoring range when
the intelligent rules of the panoramic camera trigger alarms.
ā
Custom: Set the auto alarm track time of the speed dome.
Idle Time
It is an interval from the end of alarm track of the speed dome to the
Bekijk gratis de handleiding van Dahua Technology N42DJS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dahua Technology |
| Model | N42DJS2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 51658 MB |
