Dahua Technology IVS-TB8000-E-GU1 Handleiding (85 Pagina's)

Handleiding

User's Manual

25

Procedure

Step 1 On the

Rule Config

page, select

Non-motor Vehicle Detection

from the

Rule Config

drop-down list.

Step 2 Click

Add

.

After you add a rule, the rule is enabled by default.

Step 3 By default, the detection zone covers the whole image. Drag the angles to adjust the

detection zone or click to draw a detection zone. (Click the screen to start drawing, and

right-click the screen to finish drawing.)

●

The detection zone should cover the valid vehicle targets, and avoid being too large to

be interfered from other objects.

●

Click the screen to start drawing, and right-click the screen to finish drawing.

●

The detection zone covers the whole image by default.

Figure 4-21 Non-motor vehicle detection

Step 4 Click the

Rule Parameter

to configure the parameters.

Figure 4-22 Non-motor vehicle detection parameters

Table 4-6 Description of non-motor vehicle detection parameters

Parameter Description

First Alarm Time

An alarm will be triggered when a non-motor vehicle appears in the detection

zone and stays longer than the defined time.

Attribute

You can select

Bicycle

,

Motorcycle

as the objects.

Step 5 Configure

Alarm Periods

. For details, see Step5 in "4.5.2.1 Parking Detection".

Step 6 Click

OK

.

The configuration is saved and applied, and the

Rule Config

page is closed.

Related Operations

●

Click

Empty

to clear all configured rules.

●

Click

Load Template

, select a template, and then click

OK

. Rule parameters are configured based

Bekijk gratis de handleiding van Dahua Technology IVS-TB8000-E-GU1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.