Dahua Technology IVS-PB8000-xE-GU2 handleiding

Niet gecategoriseerd

Dahua Technology

83 pagina's

PDF beschikbaar

Handleiding

User's Manual

Functions Description

Alarm Information

●

Store alarm information, including monitoring point, time,

detection channel, alarm event type, and alarm event snapshot.

●

Search for alarm information by multiple video channels or

periods (closed intervals).

●

Generate a report on all or a selection of the search results.

Table 1-2 Description of intelligent analysis

Functions Description

Tripwire Detection

●

Set the detection line as a polyline with an arbitrary shape.

●

Specify the direction of illegal crossing for each detection line.

●

Set the target trigger position (the upper, lower, left and right

sides and center point of the target box. It is set as the center

point by default.).

●

An alarm is triggered when a target crosses the detection line.

●

The system recognizes the attributes of police uniforms. You can

enable intelligent configuration and configure whether to

trigger alarm at the client.

Intrusion Detection

●

Set the detection area as a polygon with an arbitrary shape.

●

For each detection area, behavior detection can be set as

crossing the area, inside the area or both.

●

For inside the area detection, the number of targets, minimum

duration, and interval between repeated alarms can be set.

●

For targets crossing the area, the crossing direction can be set as

entry, exit, or entry and exit.

●

An alarm is triggered when a target enters or exits the detection

area.

●

The system recognizes the attributes of police uniforms. You can

enable intelligent configuration and configure whether to

trigger alarm at the client.

Climbing Detection

●

Set the detection line as a polyline with an arbitrary shape.

●

An alarm is triggered when any part of the body below the head

crosses the height detection line.

●

Set the minimum duration with any value ranging from 0

seconds to 600 seconds.

Getting up detection

●

Set a rectangular area for detecting getting up behavior.

●

Set the detection line and sleep direction line (from head to feet)

for each detection area.

●

Scenario requirement: The bed should be perpendicular to the

monitoring direction of the camera.

●

Only supports single-layer beds. Bunks beds are not supported at

this time.

●

An alarm is triggered when the target gets up during arming.

Bekijk gratis de handleiding van Dahua Technology IVS-PB8000-xE-GU2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.