D-Link DPS-PWR740AC handleiding
Handleiding
Je bekijkt pagina 41 van 69
DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
41
NOTE: It is highly recommended that you create a user account containing a username and a
password for the Switch to prevent unauthorized access to the management interface.
Creating a User Account
One of the first and most important tasks is to create a user account. Logging in using a predefined administrator-level
username will give a user privileged access to the Switch's management software. Also, such setup will help prevent
unauthorized access to the Switch and record your password for future reference.
An example to create an administrator-level account for the Switch called ‘NewUser’:
Switch#enable
Switch#configure terminal
Switch(config)#username NewUser password xxxxxxxx
Switch(config)#username NewUser privilege 15
Switch(config)#line console
Switch(config-line)#login local
Switch(config-line)#end
Switch#
In the example above:
1. At the CLI command prompt, we entered the enable command to enter the Privileged EXEC Mode. Enter is
pressed.
2. We entered the configure terminal command to enter the Global Configuration Mode. Enter is pressed.
3. We entered the username NewUser password xxxxxxxx command. Enter is pressed. This created a user
account with the username as NewUser and a password as specified.
4. We entered the username NewUser privilege 15 command. Enter is pressed. This user account is
configured to be of Administrative (15) privileges.
5. We entered the line console command to enter the Line Configuration Mode. Enter is pressed.
6. We entered the login local command. Enter is pressed to specify that the local line requires login credentials.
7. We entered the end command to exit back to the Privileged EXEC Mode.
NOTE: Usernames and Passwords are case sensitive. Usernames can be up to 32 characters
in length. Passwords must contain 8-30 characters and include at least one uppercase and
lowercase letter, one number, and one symbol, such as @!&*. It must not be identical to the
username and must not contain adjacent identical characters or digits or the default IP address
of the Switch.
Configuring the IP Address
Each switch must be assigned its own in-band IP Address, which is used for communication with an SNMP network
manager or other TCP/IP applications. The Switch's default IP address is 10.90.90.90 with a subnet mask of
255.0.0.0. You can change the IP address of the Switch to meet the specification of your networking address scheme.
The IP address of the Switch must be configured before it can be managed, by a user, via the Web UI.
An example to change the IP address of the Switch to ‘10.50.50.50’, using a subnet mask of ‘255.0.0.0’:
Switch>enable
Switch#configure terminal
Switch(config)#interface vlan 1
Switch(config-if)#ip address 10.50.50.50 255.0.0.0
Switch(config-if)#
In the above example,
1. We accessed the Privileged EXEC Mode by entering the command enable.
2. Then we entered the Global Configuration Mode by entering the command, configure terminal.
Bekijk gratis de handleiding van D-Link DPS-PWR740AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DPS-PWR740AC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10019 MB |
