D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 41 van 761
DGS-6604 m/ mSW Rls. 1.00.029 access vlan
CLI Reference Guide
10
access vlan
Use the access vlan interface configuration command to specify the access
VLAN for the interface. Use default interface vlan command to reset to default
setting.
access vlan VLAN-ID
default access vlan
Default VLAN 1
Command Mode Interface configuration
Usage Guideline The command is valid for physical ports or port-channel interfaces. If the VLAN
does not exist, the VLAN will be automatically created and a message pompt will
appear. By default, the port has access VLAN 1.
The following applies to access VLANs:
• An interface can be specified with only one access VLAN. The succeed-
ing command overwrites the previous command.
• When this command is applied, the port will change to Access mode. If
the port has been configured for other modes, Access mode will overwrite
the previous mode. The port's PVID is changed to the specified VLAN.
Examples This example shows how to set an interface eth3.1 to an untagged member of
VLAN 1000.
Verify the settings by entering the show vlan interface command.
Syntax Description
access vlan
VLAN-ID
Specifies the access VLAN for the interface.
Switch(config)# interface eth3.1
Switch(config-if)# access vlan 1000
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
