D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 354 van 761
DGS-6604 m/ mSW Rls. 1.00.029 neighbor (RIP IPv6)
CLI Reference Guide
323
neighbor (RIP IPv6)
To define a neighboring router with which to exchange routing information, use
the neighbor command in router configuration mode. Use the no form of the
command to remove an entry.
neighbor IPv6-ADDRESS IFNAME
no neighbor IPv6-ADDRESS IFNAME
Default Not configured
Command Mode Router configuration
Usage Guideline This command permits the point-to-point exchange of routing information.
Multiple neighbor commands can be used to specify additional neighbors or
peers.
When it is used in combination with the passive-interface router configuration
command, routing information can be exchanged between a subset of routers
and access servers on a LAN.
Example In the following example, RIPng updates are sent to a specified interface vlan1
on fe80::1. This command permits routing updates to be sent to specific
neighbors. One copy of the routing update is generated per neighbor:
Verify the settings by entering the show ipv6 rip database command
Syntax Description
IPv6-ADDRESS IPv6 link-local address of a router with which routing information will be
exchanged.
IFNAME The specified interface type and interface number
Switch# configure terminal
Switch(config)# router ipv6 rip
Switch(config-router)# neighbor fe80::1 vlan1
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
