D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 242 van 761
DGS-6604 m/ mSW Rls. 1.00.029 ip ospf hello-interval
CLI Reference Guide
211
ip ospf hello-interval
Use this command to specify the interval between hello packets. The no-form of
this command will reset the hello-interval to the default value.
ip ospf hello-interval SECONDS
no ip ospf hello-interval
Default 10 seconds
Command Mode Interface configuration
Usage Guideline The hello-interval is advertised in the hello packets. Configure the same hello-
interval for all routers on a specific network. A shorter hello interval ensures
faster detection of topological changes but results in more routing traffic.
When configuring the hello-interval, if the hello-interval*4<=65535, then the
dead-interval will be automatically updated to hello-interval*4.
Example The following example shows setting the hello-interval to 3 seconds on interface
VLAN 1.
Verify the settings by entering the show ip ospf interface command.
Syntax Description
SECONDS Specifies the interval in seconds. The range is 1 to 65535.
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)# ip ospf hello-interval 3
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
