D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 139 van 761
DGS-6604 m/ mSW Rls. 1.00.029 default-metric (IPv6 OSPF)
CLI Reference Guide
108
default-metric (IPv6 OSPF)
To set the default metric for IPv6 OSPF, use the default-mertic command. To
return the metric to its default value, use the no form of this command.
default-metric METRIC-VALUE
no default-metric [METRIC-VALUE]
Default METRIC-VALUE: 20
Command Mode Router configuration
Usage Guideline The default-metric command is used in conjunction with the redistribute router
configuration command (redistribute (IPv6 OSPF) command on page 390) to
cause the current routing protocol to use the same metric value for all
redistributed routes. A default metric helps solve the problem of redistributing
routes with an incompatible metric. Whenever metrics do not convert, using a
default metric provides a reasonable substitute and enables the redistribution to
proceed.
The order of the setting precedence to determine the metric is:
set metric in redistributed command > default-metric setting.
Example The following example shows an IPv6 OSPF redistributing routes from RIP. All
redistributed routes are advertised with a metric of 10.
Syntax Description
METRIC-VALUE Default metric value. A number from 1 to 16777214.
Switch > enable
Switch # configure terminal
Switch (config) # router ipv6 ospf
Switch (config-router) # default-metric 10
Switch (config-router) # redistribute rip
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
