D-Link DGS-6600-PWR handleiding
Handleiding
Je bekijkt pagina 138 van 761
DGS-6604 m/ mSW Rls. 1.00.029 default-metric (OSPF)
CLI Reference Guide
107
default-metric (OSPF)
To set default metric values for OSPF, use the default-metric command. Use the
no form of the command to remove the default-metric setting.
default-metric METRIC-VALUE
no default-metric
Default METRIC-VALUE: 20
Command Mode Router configuration
Usage Guideline The default-metric command is used in conjunction with the redistribute router
command (redistribute (OSPF) command on page 388) to cause the current
routing protocol to use the same metric value for all redistributed routes.
A default metric helps solve the problem of redistributing routes with incompatible
metrics. Whenever metrics do not convert, using a default metric provides a
reasonable substitute and enables the redistribution to proceed.
The setting precedence that determines the metric is:
metric in redistributed command > default-metric setting.
Example The following example shows a router redistributing RIP-derived routes into the
OSPF domain and all redistributed routes are advertised with an OSPF metric of
10.
Syntax Description
METRIC-VALUE Default metric value appropriate for the specified routing protocol.
Switch(config)# router ospf
Switch(config-router)# default-metric 10
Switch(config-router)# redistribute rip
Switch(config-router)# end
Switch#
Bekijk gratis de handleiding van D-Link DGS-6600-PWR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | D-Link |
| Model | DGS-6600-PWR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52758 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Breedte | - mm |
| Diepte | - mm |
| Hoogte | - mm |
| Geluidsniveau | - dB |
